Yamaha A-S2000 - Amplifier Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Yamaha A-S2000 - Amplifier herunter. Yamaha A-S2000 - Amplifier 43 Seiten.
Auch für Yamaha A-S2000 - Amplifier: Benutzerhandbuch (35 seiten), Benutzerhandbuch (34 seiten)
Seite drucken
4
5
MAIN IN
PRE OUT
L
R
6 AC IN
Use this inlet to plug in the supplied power cable.
7 VOLTAGE SELECTOR
(Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
the AC power cable into the AC wall outlet. Improper
setting of the VOLTAGE SELECTOR may cause damage
to this unit and create a potential fire hazard.
Rotate the VOLTAGE SELECTOR clockwise or
counterclockwise to the correct position using a straight
slot screwdriver.
Voltages are as follows:
AC 110/120/220/230–240 V, 50/60 Hz
1
SPEAKERS L CH
A
B
6
7
VOLTAGE SELECTOR
230-
240V
AC IN
8 Foot
The feet of this unit include built-in spikes. Using the
spikes can reduce the effect of vibrations on the set. When
using the spikes, remove the magnet foot by pulling it.
Caution
When using the feet's built-in spikes, the spikes may scratch the
shelf or floor on which this unit is installed. Use the supports
when placing this unit on expensive furniture, etc.
y
If this unit is unstable, you can adjust the foot height by rotating
it.
8
Spike
11
En