Yamaha CX-1000 Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Yamaha CX-1000 herunter. Yamaha CX-1000 20 Seiten. Natural sound stereo control amplifier
Auch für Yamaha CX-1000: Benutzerhandbuch (21 seiten), Benutzerhandbuch (20 seiten), Service-Handbuch (38 seiten)

Seite drucken

5. While recording, you can listen to or watch any other component |

without influencing the quality of the recording simply by selecting

that component with the INPUT SELECTOR.

NOTE:

see

lf a video source which is only connected digitally is to be recorded

on a VCR (analog connect only), the REC OUT selector must be

set to SOURCE, and the INPUT SELECTOR

must be set to the ap-

propriate video input. While such a recording is taking place, no

other components may be watched or listened to.

This is essentially the same as audio dubbing except that the VIDEO

switch must be on. The REC OUT selector determines from which

of the two connected VCRs the recording will be made.

The supplied remote control transmitter RS-CX1000 can be used to

operate the CX-1000 itself as well as Yamaha remotely-controlled

components featuring the RS mark (turntable, tuner, cassette deck

and compact disc player) from the comfort of your chair.

See the section CONNECTIONS for information on how to connect

these components to the CX-1000 for remote contro!. Note that no

cable is necessary for remote control of a compatible CD player.

See the operation manuals of the respective components for full

details of their operation.

Install two AA batteries into the transmitter as shown below, taking

care that the battery polarity corresponds to the illustration on the

battery compartment floor. Remove them when not using the trans-

mitter for an extended period of time.