Yamaha KMA-500 Benutzerhandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Yamaha KMA-500 herunter. Yamaha KMA-500 23 Seiten. Digital karaoke mixing amplifier

Seite drucken

You can set the following menu in Setup mode:

• Power ON recall

• Input mode

• Auto input condition

• Enable remote

• Remote mode

• MIC/MUSIC max level

• MIC/MUSIC volume select

• Initializing

To set each menu above, set the corresponding controls as

shown in the "Setup mode table" on page 15 according to

the following procedure.

To enter Setup mode, turn off the main unit

and press POWER while pressing KEY

CONTROL and ECHO MODE.

Set KEY CONTROL and MUSIC according to

the "Setup mode table" on page 15 to set

desired menus and items.

For Auto input condition, select the desired source

before selecting the item.

Set all settings you want to change before moving to

step 3.

Press KEY CONTROL to enter the settings.

" " blinks once when the settings are entered.

To terminate Setup mode, turn off the main

unit.

■ Menus in Setup mode

1. Power ON recall

Select Last memory or Preset, to recall the settings of MIC

volume/ECHO amount/MUSIC volume/ECHO MODE

when the unit is turned on.

Last memory*: The settings when the unit was turned off

last are recalled.

Preset: The settings saved to PRESET 1 are recalled.

SETUP MODE

2. Input mode

Set Input mode to Auto or Manual.

Auto*: The input source is set automatically.

Manual: The input source is selected by INPUT.

Source is selected in order of DVD, AUX**, TAPE,

BGM.

3. Auto input condition

Set the conditions for each source (DVD, AUX** and

TAPE) for Auto Input mode described in 2.

Audio*: The source is switched based on audio signal.

Video: The source is switched based on video signal.

Audio/Video: The source is switched based on audio or

video signal.

For only this menu, select desired source by INPUT

before selecting the desired item.

4. Enable remote

Enable or disable remote control.

Enable*: The remote control is enabled.

Disable: The remote control is disabled.

5. Remote mode

Set the light receiving device.

Front&Ext.*: Both the front panel and external remote

control satellite receive the signal from the remote control.

Front: Only the front panel receives the signal.

Ext.: Only the external remote control satellite receives

the signal.

6. MIC/MUSIC max level

Set the maximum volume of MIC and MUSIC.

10*: No setting.

9 to 3: The maximum volume is set to the level indicated

(2 to 0 cannot be set).

7. MIC/MUSIC volume select

Select how MIC and MUSIC volumes increase/decrease

(i.e., the volume curve) when the controls are turned.

Pattern 1*: Steep curve

Pattern 2: Less steep curve

Pattern 3: Least steep curve, and is most suitable for fine

adjustment.

8. Initializing

Reset all the settings set in Setup mode to the defaults.

Cancel: Initializing is not executed.

Initialize: Initializing is executed.

When pressing KEY CONTROL with MUSIC set to 3,

Initializing is executed.

* Default setting

** KMA-700 only