Yamaha AX15M Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem Yamaha AX15M herunter. Yamaha AX15M 6 Seiten. Speaker system/subwoofer
Auch für Yamaha AX15M: Benutzerhandbuch (6 seiten)
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,
short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not open
• Do not open the device or attempt to disassemble the internal
parts or modify them in any way. The device contains no user-
serviceable parts. If it should appear to be malfunctioning, dis-
continue use immediately and have it inspected by qualified
Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the
device or other property. These precautions include, but are not limited to, the following:
Location
• If you use a stand, check the stand's specifications and make
sure that it is sturdy enough to support the weight of the
speaker. You may need to limit the number of people around
the placed stand, in order to avoid toppling the device or caus-
ing damage to the internal components.
• If you use the TS-80 and TS-90 speaker stands manufactured
by Ultimate Systems (sold separately) to support the AX10/
AX12/AX15/AX12M/AX15M speaker models, be sure to keep
the following cautions.
– Use the speaker stands with their legs fully opened.
– Place only one speaker on each speaker stand.
– Tighten fastening screws securely.
– Remove the speakers from the stands before moving the
stands or adjusting their height.
– Add weight such as sand bags around the stand legs to pre-
vent them from falling over.
– Use the stand at a maximum height of 140 cm.
• If you use a metal socket of the AX15W subwoofer to allow
mounting of a satellite speaker, use a pole shorter than 90cm
with an outer diameter of 35mm.
• When transporting or moving the device, always use two or
more people.
• Before moving the device, remove all connected cables.
• Do not expose the device to excessive dust or vibrations, or
extreme cold or heat (such as in direct sunlight, near a heater)
to prevent the possibility of panel disfiguration or damage to
the internal components.
• Do not place the device in an unstable position where it might
accidentally fall over.
PRECAUTIONS
Water warning
• Do not expose the device to rain, use it near water or in damp
or wet conditions, or place containers on it containing liquids
which might spill into any openings.
Connections
• Before connecting the device to other devices, turn off the
power for all devices. Before turning the power on or off for all
devices, set all volume levels to minimum.
• Use only speaker cables for connecting speakers to the
speaker jacks. Use of other types of cables may result in fire.
• Be sure to observe the amplifier's rated load impedance (see
page 5), particularly when connecting speakers in parallel.
Connecting an impedance load outside the amplifier's rated
range can damage the amplifier.
Handling caution
• Always turn AC power to the power amplifier on last in any
audio system to avoid speaker damage. When turning power
off, the power amplifier should be turned off first for the same
reason.
3