ALDI FERREX XSZ46I Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Rasenmäher ALDI FERREX XSZ46I herunter. ALDI FERREX XSZ46I 19 Seiten. Self propelled petrol lawnmower

Seite drucken

Operation

smoke or allow flames or sparks in the area where the engine is

refueled or where petrol is stored. Avoid repeated or prolonged

contact with your skin or inhalation of vapour. Clean the area

around the petrol filler cap before removing the cap. Remove the

warning tag, check the fuel level.

Refill the tank if the fuel level is low (fuel tank capacity is 0.8 L).

Refuel carefully to avoid overfilling or spilling fuel. There should

be no fuel in the filler neck.

Clean up any overflow or splashes of petrol before starting the

engine.

Tighten the filler cap after filling, finger tight only.

NOTE!

Do not use wasted or regenerated oil that can cause damage to

the engine.

Operation

1. Setting the Cutting Height (Fig 9)

NOTE!

The blade can cause serious injury. Before adjusting the mower

height, stop the engine and wait for the mower blade to stop

completely.

Pull the lever towards the wheel, then move it forwards or

46CM Petrol Lawnmower

backwards to adjust the cutting height. Move it to any one of

the 7 positions (25~75mm) for the desired cutting height; Ensure

the lever clicks into place.

2. Starting the Engine

Starting procedure quick guide (Fig 10)

NOTE!

Do not operate the machine in enclosed or poorly ventilated

areas as the exhaust contains toxic substances. Keep hands,

feet, hair and clothing away from all the moving parts of the

machine. The exhaust and other parts of the machine will

become hot during use. The user shall start the engine behind

the lever.

NOTE!

To start the engine, make sure that the spark plug cap is located

on the plug and the machine is filled with sufficient oil and

petrol.

NOTE!

Press down the primer for 3 times before pulling the engine

cord handle.

Operation