aerauliqa WHS600 Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Fan aerauliqa WHS600 herunter. aerauliqa WHS600 20 Seiten.

Seite drucken

WHS RANGE

Ceiling High Volume Low Speed Fan (HVLS)

INDEX

GENERAL INFORMATION

2. PRECUTIONS

3. TYPE

4. MAIN FEATURES

5. DATA

6. DIMENSIONS AND CLEARANCES

7. COMPONENTS

8. INSTALLATION

9. WIRING DIAGRAM

9.1 CTRL-A (accessory on request)

9.2 CTRL-HS (accessory on request)

9.3 CONTROL WITH EXTERNAL POTENTIOMETER (not supplied)

10. CLEANING

11. TROUBLESHOOTING

11.1 Connection parameters

11.2 Modbus registers - Input register

11.3 Alarm codes / led status / troubleshooting

12. DECLARATION OF CONFORMITY AND INCORPORATION

1. GENERAL INFORMATION

Carefully read the instructions contained in this manual.

This Specific Manual MUST be read in conjunction with the "Installation, Operation and Maintance General Manual".

Note: store the manual for future reference. We reserve the right to improve and make changes to the manual, products and

accessories without any obligation to update previous productions and manuals.

2. PRECAUTIONS

In addition to the precautions indicated in the "Installation, Operation and Maintenance General Manual" special attention should

be paid to the following warning notes:

- fixing: check/inspect and eventually retighten all the fixing annually.

RECOMMENDED BOLT TORQUE FOR COARSE THREADED METRIC STEEL BOLTS TE-TCEI

GRADE 8.8

Size

9,5

M10

M12

M14

127

M16

198

Table 1 Use the values shown in the table to tighten all the screws.

- windy conditions: fans should not operate in case of strong wind (6m/s) and should not be installed in places where it is

frequently windy.

- weight: it is recommended that the building structure is capable to bear approx. twice the weight of the fan as well as a

torque of at least 350Nm. A professional structural engineer should perform an evaluation before installing the fan.

- key safety features: make sure that all the supplied key safety features are used to install the fan to provide a comprehensive

protection of people, animals, equipments and property.

The installer and the building owner are responsible to ensure the safety of the fan mounting system and that the fan installation

is correct, in compliance with any national and local regulations.

3. TYPE

Ceiling fans with EC brushless motor designed for industrial, civil and zootechnical applications, where high performance with

low rotation speed are required.