Zanussi ZFC21400WA Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gefrierschrank Zanussi ZFC21400WA herunter. Zanussi ZFC21400WA 44 Seiten.
Auch für Zanussi ZFC21400WA: Benutzerhandbuch (49 seiten)

Seite drucken

Problem

Customer Service

If your appliance is still not working properly af-

ter making the above checks, contact the near-

est service centre.

To obtain fast service, it is essential that when

you apply for it you specify the model and serial

number of your appliance which can be found

either on the guarantee certificate or on the rat-

ing plate located on the external right side of the

appliance.

Replacing the lamp

1. Disconnect the mains plug from the mains

socket.

Installation

Positioning

Warning! If you are discarding an old

appliance that has a lock or catch on the

lid, you must ensure that it is made unusable to

prevent young children being trapped inside.

Important! The appliance shall have the plug

accessible after installation.

This appliance can be installed in a dry, well

ventilated indoor (garage or cellar), but for opti-

mum performance install this appliance at a lo-

cation where the ambient temperature corre-

sponds to the climate class indicated on the rat-

ing plate of the appliance:

www.zanussi.com

Possible cause

There is no voltage in the mains

socket (try to connect another ap-

pliance into it).

Call an electrician.

2. Replace the lamp with one of the same

power and specifically designed for house-

hold appliances. (the maximum power is

shown on the lamp cover)

3. Connect the mains plug to the mains sock-

et.

4. Open the lid. Make sure that the lamp

comes on.

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the rating plate correspond

to your domestic power supply.

The appliance must be earthed. The power sup-

ply cable plug is provided with a contact for this

purpose. If the domestic power supply socket is

not earthed, connect the appliance to a sepa-

rate earth in compliance with current regula-

tions, consulting a qualified electrician.

Solution