aerauliqa CTRL-XWS Gebrauchsanweisung - Seite 13
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Controller aerauliqa CTRL-XWS herunter. aerauliqa CTRL-XWS 20 Seiten.
Seite drucken
3. 0-10V PROPORTIONAL FAN CONTROL WITH WIND SENSOR AND TEMPERATURE BLOCK (Mode A)
3.1 WIRING DIAGRAM
1= POWER SUPPLY 220VAC
2= POWER SUPPLY 220VAC
3= PR2.... TEMPERATURE PROBE
4= GND-... TEMPERATURE PROBE
5= PR1 ... ANEMOMETER
6= GND-... ANEMOMETER
7= NO... NO CONTACT ALARM
8= C... COMMON ALARM
9= NC... NC CONTACT ALARM
18= GND-... - 0 FAN SIGNAL OUTPUT
19= +10... +10VCC FAN SIGNAL OUTPUT
3.2 FUNCTIONALITIES
3.2.1 INDICATORS OF THE SYSTEM STATUS
3.2.2 SETTING OF WIND SPEED AND TEMPERATURE BLOCK
Press
(the led on the button flashes): the message SET = 3.0v is displayed - Setting of the wind speed (m/s - km/h - mph) to stop the unit or to reduce
its speed to minimum.
+
-
Press
or
to change the value.
(the led on the button flashes): the message SET.C = 10° is displayed - Setting of the temperature block (°C/°F) - Mandatory
Press
+
-
Press
or
to change the value.
Press
to exit (the led on the button switches off).
DIFFERENTIAL SPEED
MIN
Ventilation speed indicator
13
0-10V FAN SIGNAL OUTPUT
MAX