Alemite 3572-B Service-Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Service-Handbuch für Kontrolleinheit Alemite 3572-B herunter. Alemite 3572-B 4 Seiten. High volume control valve
Seite druckenHigh Volume Control Valve
Model
3572-A
3572-B
Control Valve Indications
Continuous product flow
Leakage at front end of Nozzle
Leakage at Extension Assembly
* Do not apply thread sealant to the first two (2) threads. Contamination can occur.
Alemite, LLC
Fluid
Oil
Oil
Troubleshooting Chart
Possible Problems
1. Foreign material on Valve Seal
2. Valve Seal worn or damaged
1. Nozzle not closed
2. Nozzle damaged
1. Initial tightening not sufficient
2. Thread sealant missing or inadequate
Changes Since Last Printing
Increased PSI to 1450
3
Extension
Rigid
Non-Drip Manual
Flexible
Non-Drip Manual
1. Disassemble, clean, and inspect seat
area. Check mating surfaces and
replace Seals as necessary. Locate
and eliminate source of foreign
material.
2. Use Kit 393772-14
1. Push nozzle closed
2. Replace Nozzle
1. Tighten leaking connection
2. Apply thread sealant* to male pipe
threads
SER 3572-A
Nozzle Type
Solutions
Revision (8-14)