3D Hobby Shop YAK55 Montageanleitung - Seite 10
Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3D Hobby Shop YAK55 herunter. 3D Hobby Shop YAK55 19 Seiten.
Seite drucken-- Insert the rudder into the fuselage, make sure it swings 45 degrees in both directions, and glue the hinges with a
couple of drops of thin CA from each side as shown.
-- Slide the tail wheel bracket over the wire and screw the wood screws into place through the bracket as shown below.
Make sure that the rudder swings freely.
-- Remove the screws to apply thin CA to the screw holes.
-- Screw the bracket back into place after the thin CA has cured.