Arrakis Systems ARC BLUETOOTH Operative Anweisungen - Seite 4
Blättern Sie online oder laden Sie pdf Operative Anweisungen für Musik Mixer Arrakis Systems ARC BLUETOOTH herunter. Arrakis Systems ARC BLUETOOTH 8 Seiten.
Seite druckenHOW TO CONNECT AND USE A CELL PHONE
The Bluetooth feature of the ARC series console allows you connect your cell phone to
the ARC series console. Thus, enabling you to take calls on your cell phone and either
put them on air, or record the call on the Audition
bus. To do this:
1. Pair your cell phone to the Bluetooth ARC
console using the steps from the previous
section. The red Drop button will be lit if
your cell phone is connected.
2. Turn on the Bluetooth channel on your
board. (CH 10 for the ARC-10, CH 15 for
the ARC-15)
3. Put the Bluetooth channel either on PGM
to put the caller on-air, or AUD if you want to put the caller on the AUD output.
4. When a call comes in on your cell phone, you will notice that the green Call
button will flash. Press the green Call button to accept the call. Press the red
Drop button to reject (clear) the call.
5. When you are finished with the call, press the red Drop button to end the call.
You may also accept, reject or drop the call using your cell phone.
IMPORTANT NOTE: When talking to the caller, you will be using the Mic channel on
the console (NOT your cell phone mic). When a Mic channel is on, then the Monitor
speakers will be muted, and you will only be able to hear the caller through the
Headphone output. You may also adjust the volume of your caller on your phone, as well as
on the console's Bluetooth channel.
IMPORTANT NOTE: When a call comes in to your cell phone, the ring will play
through the Bluetooth channel. For the best quality sound, we recommend to leave
the Bluetooth channel on the AUD output for when the call comes in. That way the
ring will not play over the air. You can then prepare the caller, and when ready, switch the
channel to PGM to put the caller on air.