3D Systems Touch Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör 3D Systems Touch herunter. 3D Systems Touch 19 Seiten. 3d stylus hands on design
Auch für 3D Systems Touch: Benutzerhandbuch (17 seiten)
Seite drucken
5.
Plug the
power supply connector
6.
Make sure that the
LEDs ring
the problem continues, contact 3D Systems customer support.
7.
After all power has been connected properly, insert the smaller end of the USB cable into the Touch device, then connect the larger
end of the USB cable into the USB port on your computer.
3D Systems, Inc.
into the
back of the Touch
at the base is lit
blue.
Blue indicates the Touch has power. If it is not, check all of the connections. If
device.
8