3DUpFitters CR-10 S5 Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationshandbuch für Racks & Ständer 3DUpFitters CR-10 S5 herunter. 3DUpFitters CR-10 S5 15 Seiten. Enclosure kit

Seite drucken

Attach the door hinges, latch mounts,

strike plates, and the knob, and the

assembly will look like the illustration to

the right.

As with the front door, adjust how the door

hangs by loosening the hinge screws,

using the strike plates to hold the door to

the latches, and then tightening the hinge

screws.

4. Assemble Back

The view to the right is of the back of the

enclosure when viewed from the back. The four

corner connectors are mirror images of the front.

The large hole is either for an air ﬁlter (purchased

separately) or can be covered up by a plastic

disc using short M4 10mm screws. On the top

and on each side are "mid panel corner

connectors", which are basically simple L-

shapes.

If assembling the Charcoal Air Filter, conﬁrm the

direction of the fan's air ﬁlter by plugging it into a USB

power supply before attaching to the ﬁlter and back of

the enclosure using M4 cap head 30mm or 40mm

screws depending on the depth of the particular fan.