Acoustical Systems AXIOM Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör Acoustical Systems AXIOM herunter. Acoustical Systems AXIOM 16 Seiten.
Seite drucken
- 1. Table of Contents
- 2. Technical Features & General Design
- 3. Alignments
- 4. Unpacking the AXIOM
- 5. Mounting the AXIOM
- 6. Setting up the AXIOM
- 7. Balancing the AXIOM
- 8. Antiskating
- 9. Setting Vertical Tracking Force
- 10. Setting Horizontal Operation Point
- 11. Aligning the AXIOM
- 12. The Genuine Alignment Template
integrated headshell designs like EMT-Tondose,
Ortofon-SPU, FR-7 and similar designs.
Both versions do feature the same technical
design and unique options for alignments.
The 2 variants do however differ in their
mounting distance, pivot to spindle distance
and resulting effective length.
Tangential alignment
It is of course possible to align the AXIOM
to the standard tangential curves of Baerwald,
Stevenson or Loefgren in any version and
standard.
The absolute best possible performance
however is obtained only by aligning the
AXIOM to the new UNI-DIN tangential curve.
It's geometric design is based on the UNI-DIN.
Unpacking the AXIOM
Please make sure that all parts are present
by unpacking the AXIOM and all its tools and
accessories.
The
AXIOM suitcase
contains the following:
•
the
AXIOM tonearm
•
the
AXIOM's accessory box
The
AXIOM's accessory box
contains these components:
•
(1) very short fist screw driver 8.0 x 25 -
(1) T-shaped Allen key driver 2.5 x 100
•
(1) Main Tungsten counter weight with
attached POM holder for trim weight
(3) tubular trim weights approx.
10 x 30 mm each - different weight
and color -
•
(2) Lateral balance weight sets -
(1) stainless steel, (1) aluminum
**for SME-bayonet version: (1) Lateral
weight set tungsten HD17**
•
(1) lock screw for lateral weight assembly
•
(1) metal screwdriver
(with selection of blades inside)
•
(4) 90° Allen wrenches -
metric sizes 0.89, 1.27, 1.5 and 2.0
•
(1) small diameter spirit level
for use on tonearm bearing pivot
•
(1) 4.2 mm drill
(non-metric countries only)
•
(1) M5 tap and die
(non-metric countries only)
•
(3) special M5 mounting screws with
- (1) 30 mm length
- (1) 40 mm length
- (1) 50 mm length
•
(3) hardened stainless steel mounting
washers with 29 mm diameter each
- (1) 8 mm, (1) 14 mm and
(1) 20 mm strong
- (1) 34 mm diameter stainless steel
cover plate with rubber ring on down
size
•
(1) cover plate for mounting point
Please check the AXIOM package careful and
make sure all the above listed components are
present.
7