artisan ARTPC-SB2M Montageanleitung Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Grill-Zubehör artisan ARTPC-SB2M herunter. artisan ARTPC-SB2M 8 Seiten. Dual side burner mounting bracket for artisan cart models: artpc-26, 32 and 36
Seite druckenSTEP 3:
Prepare the ARTP-SB2 Dual Side
Burner unit by installing the re-
quired Back Bracket (shown as
item 11 - part number 510-1244 on
page 2)
(See figure # 3)
The Back Bracket is fastened to
the side burner's existing rear sup-
port with (4) 10-32 Pan head
Screws (Item8 - Part 200-0267)
and (4) 10-32 Kept nuts (Item 6 -
Part 200-0238).
Install the second Grommet pro-
vided, in the body of the Back
Bracket. The grommet should be
on the matching side where you
will be installing side burner to the
cart.
The grommet is intended to protect the gas line to be installed at a later stage.
STEP 4:
Mount the ARTP-SB2 Side Burner
onto the Main Mounting Bracket
you just installed in the panel of
the Artisan Cart.
(See Figure # 4)
The perimeter of the Side Burner
holds the body of the unit against
the mounting bracket by fitting
over the TOP OFFSET
FLANGE.
Insert the ARTP-SB2 Perimeter
Flange between the Main Bracket
and the OFFSET Flange..
The ARTP-SB2 should rest tightly
against the body of
Bracket near the top of the Artisan
cart, but loose at the bottom.
10-32 SCREW
the Main
ARTP-SB2
SIDE BURNER
ARTP-SB2
SIDE BURNER
10-32 KEPT NUT
GROMMET
Figure # 3
TOP OFFSET
FLANGE
Figure # 4
4