Altura Photo GJ0120 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kamera-Zubehör Altura Photo GJ0120 herunter. Altura Photo GJ0120 14 Seiten. Dual wireless flash trigger set

Seite drucken

1. Turn OFF the power of both the camera and receiver.

2. Mount the transmitter onto the camera's hot shoe socket.

3. Mount the ﬂash onto the receiver's hot shoe socket.

4. If your ﬂash or studio light do not have hot shoe entries, connect the studio light cable to

the ﬂash or studio light to the ACC2 socket of the receiver.

5. Set the channel switches to the same position on both the transmitter and receiver.

(When using multiple ﬂash units, verify that all receivers are set to the same channel.)

6. Switch the receiver mode to "Flash" mode.

7. Press the test button on the transmitter to conﬁrm interaction.

8. If the transmitter and receiver status lights turn red while the ﬂash trigger light turns on, all

settings are correct.