Artopex NANO Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Inneneinrichtung Artopex NANO herunter. Artopex NANO 6 Seiten.

Nano Installation Guide

TakeOff Nano Hybrid

Bottom bracket with

teeth facing upwards

Top cap cover

Double

face tape

Déc. 2007

Top bracket with teeth

facing downward

Vertical Cap

(PECN180)

a) Use the Nano junction plates to join the 2 TakeOff

panels side by side.

b) Remove the top cap from the Nano screen

c) Install the hybrid TakeOff brackets into the vertical

profile of the Nano screen, being careful to follow the

direction of the teeth as in the drawing to the left.

Tighten them only enough to allow them to stay in place.

d) Bring the Nano screen towards the TakeOff panel and

insert the TakeOff brackets in the connector of the

TakeOff panel. Lift the bottom bracket and tighten the

screws, then tighten the screws in the top bracket.

This junction plate

is to be inserted

between the panels.

e) Finishing:

Install the two top caps, the vertical connectors

and the top cap cover.

pg.2