Alvarado WATCHMAN Installationsanleitung Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Drehkreuze Alvarado WATCHMAN herunter. Alvarado WATCHMAN 10 Seiten. Collision avoidance system
Seite drucken
WATCHMAN Installation Instructions
Alarm Duration Setting
Tools Required:
•
Right-Angle #2 Phillips Screwdriver
•
#10 Torx Wrench
To change the alarm duration setting:
1. Using a right-angle #2 Phillips screwdriver, remove
the metal lens cap guard.
2. Using a #10 torx wrench, remove the red lens cap.
3. Locate the SW1 switch. Set the switch to 4 SEC or
8 SEC [Figure 8].
4. Replace the red lens cap.
5. Replace lens cap guard.
Cleaning and Maintenance
Use and all-purpose cleaner and damp cloth to clean the Watchman unit.
Perform the following maintenance steps on a quarterly basis:
•
Check all suspension hardware (including the Watchman's eye bolts). Tighten or replace if necessary.
•
Inspect the ABS tube and end caps for cracks or other damage if there has been a collision.
•
Replace the batteries (if applicable).
•
Perform the functions check as described on page 6.
Created on: 06/26/2015
©Alvarado Mfg. Co., Inc.
For Assistance: [email protected] (909) 591-8431
Fig. 8
Page 7
PID1244R6-2