Asko TDC145V Betriebsanleitung - Seite 17

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Trockner Asko TDC145V herunter. Asko TDC145V 20 Seiten. 400v

INSTALLATION

INSTALLATION
See the separate installation instructions included in the
set of documents.
NOTE!
Do not install the machine in a room where there is a
risk of frost occurring. At temperatures around freezing
point the machine may not be able to operate properly.
The room in which the appliance is installed should be
adequately ventilated, with temperature between 15°C
and 25°C.

ELECTRICAL INSTALLATION

Connect the machine by plugging it into an earthed wall
socket. The electrical wall socket must be placed outside
of the installation area to be easily accessible.

CONNECTION ON DELIVERY

• 400 V, 3-phase, 16 A
• 50 Hz
• Heat output 5000W
• Use a type A residual-current device.
NOTE!
Do not connect the machine to the mains electricity
supply by an extension lead.

SWITCH-OVER

The switchover must be performed by a qualifi ed
electrician.
See the Settings chapter.
17