AEROBASK EPIC E1000 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Herramientas AEROBASK EPIC E1000. AEROBASK EPIC E1000 19 páginas.

Imprimir página

MASTER SWITCHES

Similar to the Epic Victory, the aircraft's main switches are placed behind the

pilot's yoke, albeit in a more simple layout. You can click the the yoke to hide it,

for better access to the switches.

On the left side, you find switches for starting up the aircraft and for initializing

various systems. On the right side, there are switches for deicing.

Behind the levers (Throttle, Condition and fuel), there are knobs for cabin

lightning.

Engine

Start

Batteries

Avionics

1&2

Master

Igniter

Pressurize

Cabin

Autopilot

Trim

Master

To start the aircraft, use the fuel tank selector on the pedestal to select the

fuel tank with the larger amount of fuel. Switch on the batteries and avionics

with "Batt1", "Batt2" and ''Avionics''.

Check levers position : Throttle, Prop and Condition in IDLE position.

Press "Fuel Pump" to switch on the fuel pump.

Finally, press and hold "Start" until NG > 10%, then enable the ''Igniter switch''.

After start, press "Starter Gen" is pressed. For later use of autopilot and electric

trim, you also need to press the "Autopilot" and "Trim" master switches.

Otherwise, autopilot and trim won't work. Please note that this autopilot switch

is not the same as the AP button you can find directly on the autopilot. Finally,

you should also enable "Press Air", to ensure the cabin gets pressurized

properly.

Starter

Fuel

Generator

Pump

Pusher

Oxygen

Automatic

Dump

Fuel Tank

Cabin

Selection

Pressure

Strobe

Lights

Navigation

Ice light

Lights

Detection

Windshield

De ice

Heat

Boot

Prop

Heat

Taxi

Light

Landing

Light

Pitot

Heat

Inert

Sep