Aerobits TR-1F Manual - Página 2
Navegue en línea o descargue pdf Manual para Transceptor Aerobits TR-1F. Aerobits TR-1F 7 páginas. 0.25/0.5/1 watt adsb and flarm transceiver
Imprimir páginawww.aerobits.pl
• Configurable 0.25/0.5/1 Watt RF output power for ADSB
• Licensed FLARM transceiver (0.025 Watt output power)
• Implemented MAVLink and AERO TM protocol
• Lowpower consumption and low weight design
• Simple plug&play integration
• Programming via AT commands
• Designed to meet MOPS DO260B (except the output power)
• Dimension: 35.0x25.0x8.5mm
TECHNICAL PARAMETERS
Parameter
Frequency
Input voltage
Current consumption
Sensitivity
RF Output power
ESD protection
MAVLink (baud)
AERO (baud)
Main connector
Antenna connector
Dimension
Weight (without cables and antennas)
Table 1: Technical parameters.
ELECTRICAL SPECIFICATION
Pin
Wire colour
1
Red
2
Green
3
White
4
Black
Table 2: Electrical parameters
Revision: 09March20
This document is subject to change without notice. For technical questions, contact:
ADSB 1090MHz, FLARM 868 MHz (jumping depending on
Name
+5V
TX
RX
GND
Value
region between xxxxxx)
5V
180mA
80dBm
Configurable +30dBm, +27dBm, +24dBm
All lines
115200bps
115200bps (AT commands)
PXMBNI05RPM04APC
2x MMCX
35.0x25.0x8.5mm
14grams
Function
Power supply (5V/70mA)
Data from device to host
Data from host to device
Ground
2
TR1F
ADSB In/Out
Document Number: 090320