Akuart SMARTDIVIDER Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Sistema de altavoces Akuart SMARTDIVIDER. Akuart SMARTDIVIDER 4 páginas.
Imprimir páginaAKUART Installation Manual | SmartDivider
3 //
4
3
ASSEMBLY - TOP WIRES + CEILING MOUNTS
- For each top wire supplied, attach the ceiling mount as illustrated below.
1
2
ceiling mount
4
INSTALLATION - TOP WIRES
A) Drill holes in ceiling, add rawl plugs.
B) For each row of SmartDividers, the distance between the two holes is 45 cm.
D) Screw hooks with attached top wires into holes in ceiling.
E) The distance between two rows of SmartDividers is 8 cm, which is the same distance as the distance from the side of the SmartDivider to the wire.
F) Insert the ends of the top wires into the wire locks on the SmartDividers. Depress the wire lock to release the wire again.
G) The top wires can be trimmed to the desired length from ceiling to the top of the SmartDivider columns, plus an additional 5 cm, using wire cutters.
Do this before inserting the wires into the wire locks.
45 cm
B
D
F
wire lock
SmartDivider frame
3
24 cm
C
G
desired length from
top of column to ceiling
E
8 cm
8 cm
8 cm
5 cm
wire cutter
SmartDivider frame
wire lock
4
5
ceiling
ceiling
45 cm
24 cm
8 cm
8 cm
6
8 cm