Canon Color imageCLASS MF8050Cn Manual de inicio - Página 11
Navegue en línea o descargue pdf Manual de inicio para Impresora todo en uno Canon Color imageCLASS MF8050Cn. Canon Color imageCLASS MF8050Cn 29 páginas. Colour laser multifunction
También para Canon Color imageCLASS MF8050Cn: Manual de inicio (33 páginas), Especificaciones (2 páginas)
Imprimir página
1
2
Preface
Installing the Machine
Check and press [OK].
Check that paper is
loaded in Drawer 1.
Next
Performing Color Correction.
Color correction takes approximately 255
seconds.
Make sure that paper is loaded,
and then press [OK].
Supported paper:
Size: A4, LTR, 16K
Type: Plain 1/2, Rec
OK
Confirm the procedures for the color
correction, and then press [OK].
Steps (Start:Press OK)
1. Print Adj. Image 1
2. Scan Adj. Image 1
The test chart (adjusted image 1) is printed.
Place the test chart with the printing side face down.
Place the paper setting the direction of black streak to the
back side of the platen glass.
Press [
] (Start).
Remove the test chart (adjusted image 1) placed on the platen glass in Step
3
Configuring and Connecting the Fax
Use numeric keys, and then
press [OK].
Current Time Settings
2010 01/01
12:52
AM
•
Move the cursor with [ ] or [ ].
•
Switch to <AM> or <PM> with [
or [
].
Check the temperature of the installation site.
If the room temperature is low, correction may not be performed properly.
If <Adjustment failed.> appears
•
Is the paper loaded correctly?
Load plain paper or recycled paper of A4/Letter size in the paper cassette.
•
Is the test chart placed on the platen glass correctly?
Place the test chart with the printing side face down and the black streak toward
the back of the machine.
•
Has a paper jam occurred?
Remove the jammed paper.
Step 1
Printing adj. image 1.
Place adj. image 1 on
Step 2
the glass with black
Scanning adj. image 1.
side toward the back.
Press [Color] start.
4
Connecting to a Computer and
Installing the Drivers
Press [OK].
Adjust image to
reproduce original
color?
Yes
No
•
You can perform color
correction by selecting <Yes>
to obtain optimum copy
results or printout results. For
]
details on the procedure, see
the following "Performing
Color Correction."
Open the feeder.
Close the feeder.
Copy Image Adjustment
.
Appendix
Initial screen appears,
and initial setting is
finished.
Copy: Press Start
100%
LTR
1
+ -
Density: 0
Original Type: Text...
Copy Ratio: 100% Di...
1