Air Delights E-46 Instrucciones de instalación y funcionamiento - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación y funcionamiento para Calentador de agua Air Delights E-46. Air Delights E-46 4 páginas. Chronomite instant-temp water heaters

Imprimir página
IMPORTANT NOTES:
1.
Turn off electrical supply at circuit breaker.
2.
Turn on water supply.
3.
Expel all air from lines and heater by turning on the faucet.
4.
Turn on electrical power supply at circuit breaker.
Figure 1 Heater Installation
Instant-Temp Heater
#1
#3
ITEM PART NO.
1.E -_ _
1. Chronomite Instant-Temp
2.
2. Electrical junction box
3.
3. Electrical conduit
4.
4. Dual outlet angle valve
5.
5. Compression fittings (supplied)
6.
6. Copper or flex tubing
7.
7. Copper or flex tubing
8.A-212
8. Faucet Flow Control/Dual Thread
9.
9. Potentiometer (optional field
temperature control)
Items 1 and 8 are supplied
Note: C = Copper; MP = Male Pipe; FP Female Pipe; STD –Thread; Comp = Compression Fittings
Air in the heater may cause the elements to burn out. If the water lines are drained,
allowing air in the heater, be sure to use the following start up procedure.
#6,
#7
#5
ITEMS NEED FOR INSTALLATION (Fig. 1)
NAMES
QTY
#8
#4
#2
1
As shown in figure 1
1
½" conduit, length as required
1
½ " female Pipe x 7/16" comp. x 3/8" comp. x
Brass Craft PN R2701R-RGH or equivalent
2
3/8" compression fittings x ¼" Male Pipe
1
3/8" OD, 5" long (keep short)
1
3/8" OD, length as required (keep short)
1
15/16" Male, 55/64" Female A-212 for Standard Flow Models
or 15/16"Male, 55/64"Female L-212 for Low Flow Models (See
Figure 2)
1
¾
2
" x 4
" x
" (See Figure 4)
3/16
3/16
DESCRIPTION
2