Flying Industry Development S1PUB-DC12 Manual rápido
Navegue en línea o descargue pdf Manual rápido para Mando a distancia Flying Industry Development S1PUB-DC12. Flying Industry Development S1PUB-DC12 2 páginas. Rf wireless remote control radio controller / transmitter & receiver
Imprimir páginaRF Wireless Remote Control Radio Controller / Transmitter & Receiver
Package Include:
12 x Receiver: S1PUB-DC09 / S1PUB-DC12 / S1PUB-DC24 (1 Channel / Three Control Modes)
1 x Transmitter: CV-12
1 x User manual
Feature:
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass
through walls, floors and doors.
With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/ several transmitters can control one/ several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Receiver:
Model No.: S1PUB-DC09 / S1PUB-DC12 / S1PUB-DC24
Channel: 1 CH
Control Mode: Toggle, Momentary, Latched
Coding Type: Learning code
Coding Setting: By learning
Power Supply (Operating Voltage): DC12V±1V (S1PUB-DC12), DC9V±1V (S1PUB-DC09), DC24V±1V (S1PUB-DC24)
Working Voltage Range of Relay: AC110~240V or DC0~28V
PCB size: 74mm x 52mm x 24mm
Case size: 79mm x 58mm x 35mm
Maximum Working Current: 30A
Transmitter:
Model No.: CV-12
Channel: 12 CH
Remote Control Distance: 500m / 1500ft (theoretically)
Encode: Fixed code by soldering
Unit size: 110mm x 50mm x 18mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Usage:
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as
following operation):
Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle: Press -> On; Press again -> Off.
Press button 1: Turn on Receiver 1 (connect A and B, disconnect A and C)
Press button 1 again: Turn off Receiver 1 (disconnect A and B, connect A and C)
...
Press button 12: Turn on Receiver 12 (connect A and B, disconnect A and C)
Press button 12 again: Turn off Receiver 12 (disconnect A and B, connect A and C)
Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold button 1: Turn on Receiver 1 (connect A and B, disconnect A and C)
Release button 1: Turn off Receiver 1 (disconnect A and B, connect A and C)
...
Press and hold button 12: Turn on Receiver 12 (connect A and B, disconnect A and C)
Release button 12: Turn off Receiver 12 (disconnect A and B, connect A and C)
Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
Control mode Latched: Press -> On, other relays Off; Press another button -> Off.
Press button 1: Turn on Receiver 1 (connect A and B, disconnect A and C)
Press any other button: Turn off Receiver 1 (disconnect A and B, connect A and C)
...
Press button 12: Turn on Receiver 12 (connect A and B, disconnect A and C)
Press any other button: Turn off Receiver 12 (disconnect A and B, connect A and C)
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [email protected]