Baumer NE210 Manual de instrucciones - Página 34

Navegue en línea o descargue pdf Manual de instrucciones para Caja Baumer NE210. Baumer NE210 44 páginas. Electronic preset electronic preset counter

NE210

Operating mode In the operating mode:

Change ➜ Hold down the key

4 Operating mode

The operation and use of the counter are described in this section.

● As soon as the power supply has been switched on, the counter

is automatically set to the operating mode.

- the current counter status can be read and reset;

- the input preset value can be read and changed, provided this is

enabled in the programming mode (line 5);

- the scaling factor can be read and changed, provided this is enabled

in the programming mode (line 5);

All the parameters can be disabled in the programming mode.

Current count

After the counter has been turned on or upon selection via key

the current counter status is displayed in the operating mode.

➜ Read the counter status display.

Reset Resetting must be enabled in the programming mode (line 6).

➜ Press the

Preset value

Functions relating to the preset value must be enabled in the pro-

gramming mode (line 5).

➜ Press the

➜ Read of preset value.

change flashes.

➜ Hold down the key

flashing decade is reached.

If a key is not operated within 15 seconds, the current counter status

will automatically be re-displayed.

Store ➜ Press the

The preset value can be changed during counting. This function must

be enabled in the programming mode (line 4).

● If a value is disabled in the operating mode, it will be skipped and

the next value displayed.

Scaling factor

Scaling factor functions must be enabled in the programming mode

(line 5).

➜ Press the

➜ Read off the scaling factor.

www.baumer.com

key.

until the decade position you require to

until the required number within the

key.