AmpliVox Power Pod SW245 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces AmpliVox Power Pod SW245. AmpliVox Power Pod SW245 8 páginas. Wireless pa with usb / sd media player and swb245 with bluetooth receiver

Imprimir página

MP3 PLAYER

LED STATUS

Charge Indicator - will light when main SLA battery is being charged.

Mode - will light when SD/USB is being used.

A - B - will light when programing repeat function.

REC - will light when recording to a SD/USB device.

Play/Pause - will light when SD/USB device is playing or flashing when

paused .

BUTTON FUNCTIONS

Remote Control Eye - do not block.

FM/USB/SD ON/OFF - turn MP3 player ON/OFF.

Play/Pause/Record - use for SD/USB function.

10+/Folder - move ahead 10 selections (SD/USB).

/ FM UP - advance forward to next song / advance up to

next FM frequency .

/ FM Down - move back to last song / advance down

to next FM frequency .

10-/Folder - move back 10 selections (SD/USB).

Mode / FM Recall - use to select Repeat last song/folder/

or all songs on SD/USB device. Press to move to next FM

station in memory.

A-B / FM Scan Memory - use to set length of repeat on

SD/USB device. Press to auto scan local FM stations and place in memory.

Display Window

WIRELESS MICROPHONES

BATTERIES



MICROPHONE INPUT JACK

LAPEL / HEADSET

POWER SWITCH

OFF—STANDBY—ON

Handheld Wireless Microphone - Screw off the lower bottom section of microphone, notice the "+" and

"-" signs on base. Insert a 9V battery. Screw battery cover back on. LED will turn RED when battery is low.

Wireless Bodypack - Slide open the case and insert a 9V battery.

9 V Rechargeable batteries can be recharged inside of the SW245 (see Battery Compartments).

Battery life is about 8 hours.

CAUTION! Batteries supplied are not rechargeable.

MICROPHONE OPERATION

Turn on SW245. Set Wireless Microphone Volume Control (1) at half way.

 Handheld Wireless Microphone - Slide switch to the " ON" position. Green LED will light on

front of speaker to show that signal is being transmitted and received. Talk into microphone and

adjust volume. Middle position is MUTE. Slide switch to "OFF" to save battery power.



Wireless Bodypack - Connect either the Lapel or Headset Microphone into the input jack on the

Wireless Bodypack. Set Gain Control at half way. Slide the Power Switch to "ON". Red LED will

light on bodypack and Green LED will light on front of speaker to show that signal is being trans-

mitted and received. Speak into microphone and adjust the Gain control to desired loudness.

NOTE: The center position of the Power Switch is to be used when you want to temporarily

quiet microphone.



NOTE: The orange sticker with a number that is attached to the; SW245, Wireless Handheld

Microphone and the Wireless Transmitter Bodypack refers to the wireless frequency. All three

stickers must have the same number for the wireless to operate correctly.