Follett H50R5A/W Manual de funcionamiento, servicio y piezas - Página 7
Navegue en línea o descargue pdf Manual de funcionamiento, servicio y piezas para Dispensador Follett H50R5A/W. Follett H50R5A/W 17 páginas. Ice and water dispenser
También para Follett H50R5A/W: Manual de instalación (13 páginas)
Imprimir página
- 1. Operation
- 2. Troubleshooting
- 3. Before Calling for Service
- 4. Troubleshooting Sensorsafe Board and Sensors
- 5. Wiring Diagrams
- 6. Dispense Chute and Splash Panel Areas - Lever Models
- 7. Dispense Chute and Splash Panel Areas - Sensorsafe Models
- 8. Wheel Motor and Drive System
- 9. Hopper Components
- 10. Solenoid Dispense Assembly
Wiring diagrams
How unit works — lever models
The dispense wheel motor and ice dispense solenoid are energized through the power and ice dispense switches. The
water solenoid is energized through the power and water dispense switches. The icemaker receives the bin signal
through the power switch, the normally closed bin thermostat and the icemaker switch. The 25 and 50 series dispensers
are equipped with a level fill timer to maximize the fill in the ice storage area. While the bin level thermostat is calling for
ice, the level fill timer is energized. Every 18 minutes the timer energizes the level fill relay, rotating the wheel motor for 5
seconds. When ice builds up around the bin thermostat, the contacts open, cutting the bin signal to the icemaker.
FROM
JUNCTION
BOX
POWER
SWITCH
BLACK
BLACK
DISPENSE SWITCH
BLACK
BIN
T-STAT
BLACK
BIN SIGNAL
SWITCH
POWER SUPPLY
BLACK
WS
ORANGE
PURPLE
1
7
4
R1
BROWN
LEVEL FILL
TIMER
18 MIN OFF
5 SEC ON
BIN SIGNAL
TO ICEMAKER
7
WATER SOLENOID
DISPENSE
SOLENOID
DS
BLACK
M
WHEEL MOTOR
1
2 3
BLACK
R1
LEVEL RELAY
FROM
JUNCTION
WHITE
BOX
WHITE
WHITE
WHITE
WHITE