AMSOIL BMK-30 Instrucciones de instalación y mantenimiento - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación y mantenimiento para Equipos de laboratorio AMSOIL BMK-30. AMSOIL BMK-30 6 páginas.

4. After engine has warmed, shut off and re-check engine oil level. Fill as nec-

essary.

5. Record vehicle mileage/operating hours and date of installation.

F. Periodic maintenance

1. Periodic visual inspection of the ﬁttings and hoses is recommended. Check

for leaks, hose deterioration and cuts. Repair and/or replace as necessary.

2. Refer to Recommended Filter Change Interval chart for servicing intervals.

3. To change the ﬁlter element:

a. Ensure engine is off and use caution as the engine, oil and ﬁlter may

be hot and could result in an injury.

b. Using a ﬁlter wrench, remove the ﬁlter element. Dispose of properly.

⁄

Oil Pressure Line

Diagram A

MINIMUM AREA NEEDED FOR

DUAL MOUNT AND SPIN-ON

OIL FILTER ELEMENTS

* Mount and element heights

EaBP-120

⁄

plus 1-inch removal clearance

AMSOIL By-Pass Filter

EaBP-120

c. Clean the ﬁlter gasket contact area on the mount with a clean, lint-free rag.

d. Lubricate the new ﬁlter gasket with clean oil.

e. Fill ﬁlter as full as possible with engine oil.

f. Screw on new ﬁlter, tighten per instructions on the ﬁlter.

g. Start engine and check for leaks.

h. Check engine oil level, ﬁll as needed.

i. Record vehicle mileage/operating hours for future reference.

Diesel Powered Engines: Due to higher oil contamination levels in diesel

engines and variance in fuel quality, maintenance intervals for the ﬁlter ele-

ment and oil change intervals should be determined using oil analysis. For