Electrolux # Manual de uso y mantenimiento - Página 11

SETTING SURFACE CONTROLS

Your cooktop may be equipped with any combination of the following burners:

Simmer Burner: best used for simmering delicate sauces, etc.

Standard Burner: used for most all surface cooking needs.

Large Burner: best used when bringing large quantities of liquid to temperature and when

preparing larger quantities of food.

Regardless of size, always select a utensil that is suitable for the amount and type of food

being prepared. Select a burner and ﬂame size appropriate to the pan. Never allow ﬂames

to extend beyond the outer edge of the pan.

Your cooktop is also equipped with 270° rotation ﬂame control valves. These valves provide

enhanced control of the burner ﬂame. Each burner lights automatically from an electric ignitor

when its control knob is turned to the LITE position.

CAUTION

Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on

top of the cooktop when it is in use. These items could melt or ignite. Potholders, towels or wood spoons

could catch ﬁre if placed too close to a ﬂame.

To operate the surface burner:

1. Place cooking utensil on burner.

2. Push in and turn the Surface Control knob to

burner, make sure to keep the knob setting between the two

the outer ring burner is lit. Note: All electronic ignitors will click at the same

time. However, only the burner you are turning on will ignite.

3. Visually check that the burner has lit.

4. Turn the control knob to the desired ﬂame size. The control knobs do not

have to be set at a particular mark. Use the guides and adjust the ﬂame as

needed. DO NOT cook with the Surface Control knob in the

(The electronic ignitor will continue to click if left in the

premature wear.)

In the event of an electrical power outage, the surface burners can be lit manually.

To light a surface burner, hold a lit match to the burner head, then slowly turn

the Surface Control knob to

manually.

Surface Cooking

(LITE). For dual ﬂame

. Use caution when lighting surface burners

icons until

position.

Regular burner

position, causing

control knob

Dual burner

control knob