Bosch 2 Manual de instrucciones - Página 18

Imprimir página

1. Installation and Connection

Appliance door

qAppliance door

W ith good care and cleaning, your appliance will retain

A p p l i a n c e d o o r

its appearance and remain fully functional for a long

time to come. This will tell you how to remove the

appliance door and clean it.

Detaching and attaching the oven door

For cleaning purposes and to remove the door panels,

you can detach the oven door.

The oven door hinges each have a locking lever. When

the locking levers are closed (figure A), the oven door

is secured in place. It cannot be detached. When the

locking levers are open in order to detach the oven

door (Fig. B), the hinges are locked. They cannot snap

shut.

Warning – Risk of injury!

Whenever the hinges are not locked, they snap shut

with great force. Ensure that the locking levers are

always fully closed or, when detaching the oven door,

fully open.

Detaching the door

Open the oven door fully.

Fold up the two locking levers on the left and right

(figure A).

Close the oven door as far as the limit stop. With

both hands, grip the door on the left and right-hand

sides. Close the door a little further and pull it out

(figure B).

Attaching the door

Reattach the oven door in the reverse sequence to

removal.

When attaching the oven door, ensure that both

hinges are inserted straight into the opening

(figure A).

The notch on the hinge must engage on both sides

(figure B).

Fold back both locking

levers (figure C). Close the oven door.

Warning – Risk of injury!

If the oven door falls out accidentally or a hinge snaps

shut, do not reach into the hinge. Call the aftersales

service.

Removing and installing the door panels

To facilitate cleaning, you can remove the glass panels

from the oven door.

Removal

Detach the oven door and lay it on a cloth with the

handle facing down.

Pull off the cover at the top of the oven door. Press

in the tabs on the left and right using your fingers

(fig. A).

Lift the top panel up and pull it out (fig. B).

Lift the panel up and pull it out (fig. C).