Andersen Verilock 0106512 Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Sensores de seguridad Andersen Verilock 0106512. Andersen Verilock 0106512 16 páginas. For a-series and 400 series windows and patio doors, 200 series patio doors and renewal by andersen windows
Imprimir páginaBattery Replacement Instructions - continued
Renewal by Andersen Gliding Windows
1. Rotate the lock handle 90 degrees from the locked
position and remove both screws.
2. Rotate lock handle an additional 90 degrees to the
full unlocked position.
3. Remove lock from sash.
4. Locate the battery compartment on the bottom of
the VeriLock lock.
5. Carefully remove battery cap.
6. Remove discharged batteries from the VeriLock
lock using a small flat blade screwdriver to
carefully pry the batteries from the terminal. (see
battery disposal information on page 5).
7. Replace the battery with a fresh CR-2025 lithium
coin cell battery into the battery ring, with the
positive (+) side facing out.
8. Reapply battery cap.
9. Reinstall VeriLock lock on the sash.
10. Move the sash into the closed position and lock
the unit.
11. Verify that the sensor is communicating with your
security system or self-monitoring application
by unlocking the window and checking for the
unlocked message and then opening the window
and checking for the window open message.
9142268
Renewal by Andersen Gliding Windows
Small
Flat Blade
Screwdriver
Insert screwdriver
into slot end to
remove battery.
10
User's Guide
VeriLock Lock
Battery Cap
CR-2025
Battery