Dreamline ENIGMA-Z SHDR-62607610 Series Manual de instrucciones de instalación - Página 8

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Productos de fontanería Dreamline ENIGMA-Z SHDR-62607610 Series. Dreamline ENIGMA-Z SHDR-62607610 Series 20 páginas. Shower door & tub door

1.
Measure the distance between the two finished
walls at the top, middle and bottom. This distance is
marked as "W".
Also check the threshold for level and the walls for
plumb.
Use the "W" dimension at the model height to cut the
Upper Guide rail (#03) to size for your opening.
Note: The minimum threshold requirement for
the ENIGMA-Z is 2-3/8" of flat threshold space.
2.
The Upper Guide rail (#03) has been precut for
your model width of: 48" or 60" (Please Note: the actual
rail is shorter than the model width by design).
You will need to cut the Upper Guide rail (#03) from
the door end which is farther from the Glass bracket
(#07) holes.
The length to cut off will be L:
Model Width – opening W = cut off length L

FOR EXAMPLE

If your model width is 48" and your finished opening is
46", then you will need to cut 2" off of the rail from the
door end.
Example: 48"– 46" = 2" cut off
ENIGMA-Z manual Ver 1 Rev 4 10/2016

Installation steps

See Fig. 1 for details
2-3/8"
minimum
threshold
See Fig. 2 for details
Top
Middle
Bottom
Fig. 1
glass bracket
holes
Fig. 2
door end
door end
8