ANDI WMA 7612 L Desmontaje - Página 5

Navegue en línea o descargue pdf Desmontaje para Lavadora ANDI WMA 7612 L. ANDI WMA 7612 L 14 páginas.

• Pull down the front panel and release from the fixtures on the body.

8- HINGE

• Remove the front door.

• Remove the bellow clamp that attaches the bellow to the front panel.

• Remove the bellow.

• Remove the two screws that connect the hinge to the front panel. ( Figure 1c )

9- LOWER COUNTER WEIGHT AND TUB COVER

• Remove the front panel. ( figure 3, 4, 5 )

• Remove the lower counter weight fixture screws and pull off the counter

weight.

• Tub cover is assembled with 12 clips to the tub. Remove them and take out

the tub cover.

10- TUB SEAL

• Remove the front panel. ( figure 3, 4, 5 )

• Remove the lower counterweight.

• Remove the tub cover.

• Tub cover is pulled off and turned upside down.

• Tub seal is removed. ( When remounting, the tub seal, assemblying mark on

tub should match the corresponding mark on the tub cover )

Figure 5