andi be free Vent Mount Manual - Página 4

Navegue en línea o descargue pdf Manual para Cargador de batería andi be free Vent Mount. andi be free Vent Mount 15 páginas. Wireless charger for car

Imprimir página

show the same number/ millimeter. The

millimeters at the top and bottom should

also be identical.

• • Take the Sticky Pad and remove the

Take the Sticky Pad and remove the

protective film. Hold the Sticky Pad on the

edge only so as not to transfer any dirt to

the adhesive surface (this will affect the

adhesive strength).

• • Hold the template firmly with one hand

Hold the template firmly with one hand

and check again that the template is

correctly seated.

• • Stick the Sticky Pad into the round recess

Stick the Sticky Pad into the round recess

of the template on the smartphone.

• • Press the Sticky Pad firmly and wait 30

Press the Sticky Pad firmly and wait 30

minutes before the first use.

• • Before the first use, check the hold of the

Before the first use, check the hold of the

Sticky Pad by docking it to the charger

and pulling it off gently.

Start and stop charging

• • With the help of the andi be free® Sicky Pad your smartphone can

With the help of the andi be free® Sicky Pad your smartphone can

magnetically attach to the charger (

• • Push the bottom of your smartphone against the top of the charging head

Push the bottom of your smartphone against the top of the charging head

of the andi be free® Wireless Vent Mount Charger.

• • Now slowly lower the smartphone until you notice the strongest attraction

Now slowly lower the smartphone until you notice the strongest attraction

of the magnet and then release your smartphone. The charging process

will start automatically and will be shown on the smartphone display.

• • To disconnect, remove the smartphone gently sideways from the

To disconnect, remove the smartphone gently sideways from the

charging head by tilting it sideways. The charging process will be

interrupted automatically.

Safety Instructions

Power

Use a QC3 power plug for optimal charging results.

Never disconnect the USB power plug with wet or damp hands!

In case of malfunction while using the andi be free® device, unplug the pow-

er plug. Do not carry or pull the andi be free® product by the USB cable. The

). ).

* *