ATL ATU Telex Unit Manual de funcionamiento e instalación - Página 12

Navegue en línea o descargue pdf Manual de funcionamiento e instalación para Módem ATL ATU Telex Unit. ATL ATU Telex Unit 16 páginas.

R) PRINTER COMPULSORY:

S) DROP CARRIER ON LINE CLOSED:

T) AUTOMATIC RESET:

X) PREVIOUS LINE

Y) DISPLAY COMPLETE CONFIGURATION

Z) EXIT CONFIGURATION

(CR) NEXT LINE

Parameter values as shown in the table above represent the Factory

Default values.

Host Speed (A)

Shows the speed of the Host interface and is normally set up at

installation or automatically by the Host software. In some countries

the range may be restricted to the faster speeds.

Host Data Bits (B)

Shows the number of bits in a byte

Host Stop Bits (C)

Shows the number of stop bits in each byte.

Host Parity (D)

Shows the Parity of each data byte.

Host Security (E)

Shows the security being used by Host computer. (See section 3 for

more information).

Host Flow Control Security (F)

Shows the flow control being used by Host computer. (See section 3

for more information).

Printer Selected (G)

Shows which printer has been selected for connection on the Auxiliary

Port.

Note: ATL will only provide support for its own brand of Baudot or

ASCII Monitor Printers. The current Ascom Baudot Printer is known as

a model 1040 and the current Ascom ASCII Printer is known as a

model 1030. The Ascom ASCII Printer model offers the additional

benefit of printing with two font styles; thereby making is easier to

differentiate incoming calls from outgoing calls when looking at a

printout.

0)No 1)Yes

<0>