Electrolux EFA9620 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Campana de ventilación Electrolux EFA9620. Electrolux EFA9620 18 páginas.

INSTALLATION

Drilling the Ceiling/shelf

• Use a plumb line to mark the centre of

the hob on the ceiling/support shelf.

• Place the drilling template 21 provided

on the ceiling/support shelf, making

sure that the template is in the correct

position by lining up the axes of the

template with those of the hob.

• Mark the centres of the holes in the

template.

• Drill the holes at the points marked:

• for concrete ceilings, drill for plugs

appropriate to the screw size.

• for hollow brick ceilings with wall

thickness of 20 mm: drill ø 10

mm(immediately insert the Dowels

11 supplied).

• for wooden beam ceilings, drill ac-

cording to the wood screws used.

• for wooden shelf, drill ø 7 mm.

• for the power supply cable feed, drill

ø 10 mm.

• for the air outlet (Ducted Version),

drill according to the diameter of the

external air exhaust duct connec-

tion.

• Insert two screws of the following

type, crossing them and leaving 4-5

mm from the ceiling:

• for concrete ceilings, use the appro-

priate plugs for the screw size (not

provided).

• for Cavity ceiling with inner space,

with wall thickness of approx. 20

mm, Screws 12h, supplied.

• for wooden beam ceilings, use 4

wood screws (not provided).

• for wooden shelf, use 4 screws 12g

with washers 22 and nuts 23, pro-

vided.

electrolux 9

Installation