AirTech ATP-400B Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Radio AirTech ATP-400B. AirTech ATP-400B 8 páginas. Land mobile radio (lmr)
Imprimir página
Unpacking
Unpack and check that all items have been enclosed.
Packing contents:
radio
antenna
mAH)
belt clip
hand strap
Optional Accessories
1. External speaker/microphone
2. Additional battery pack
Getting Ready
1.
Installation and Removal, Belt Clip
Installation: Align the belt clip with the
plastic slots of the battery pack. Slide the
belt clip onto the battery pack, pushing
firmly until a click heard.
Removal: Hold up the belt clip release
tab with a fingernail or a coin (or like
instrument). While holding up the
release tab, slide the belt clip out and
away from the battery pack.
2.
Installation and Removal, Battery Pack
Installation: Turn off the transceiver. Put the three sills
battery pack (1,650
charger
user's manual
of the battery pack in the bottom hole
of the unit.
Push the battery pack toward the
back of the transceiver until a click
heard.
Removal: Turn off the transceiver.
Hold the battery with the two side
latch lever of it sliding down. While
holding the latch lever down, pull the
battery pack against the rear side of
the transceiver. Separate the battery
pack from the transceiver.
3.
Installation Antenna
Rotate the antenna clockwise until it
is seated firmly.
*. Before starting operation, make sure the battery is fully
charged.