Bosch B22CS50SNW-01 Reparación general - Instrucción - Página 24
Navegue en línea o descargue pdf Reparación general - Instrucción para Frigorífico Bosch B22CS50SNW-01. Bosch B22CS50SNW-01 41 páginas. Bosch b22cs50snw-01 refrigerator/freezer
Imprimir página2.13
Refrigeration circuit leaking
2.13.1 Intake side leaking
If the refrigeration circuit leaks on the intake side, resulting in repairs,
always replace the compressor and dryer.
If atmospheric humidity penetrates the refrigeration circuit, the oil in
the compressor will be contaminated.
2.13.2 Pressure side leaking
If the refrigeration circuit is leaking on the pressure side, it is not
necessary to replace the compressor. However, the dryer must be
replaced.
No air humidity can penetrate the refrigeration circuit. The oil has not
been contaminated.
2.14
Refrigerant capacity specification
When the refrigerant circuit in refrigerators and freezers is optimised,
this frequently leads to changes in the refrigerant capacity without
changes to a customer service part. The product number (E no.)
remains the same in these cases.
Therefore, an exact refrigerant capacity cannot be specified in the
service documentation (spare-parts list, repair manual).
The refrigerant capacity, for the appliance which is to be
repaired, can be found on the appliance rating plate.
2.15
Refrigeration zones in the refrigerator
compartment
173_58300000002379_ara_en_j.doc – 29.04.14
The air circulation in the refrigerator compartment produces different
refrigeration zones.
Perishable food requires a storage temperature colder than 4 °C. To
ensure that perishable food is kept as fresh as possible, this zone is
marked in most appliances.
Depending on the model the zone for perishable food is :
►
between the arrow (1) stamped on the side and the glass shelf
situated (2) below. (Fig. 1)
►
between the two arrows (1 and 2). (Fig. 2)
►
If there are no stamped arrows, the whole refrigerator
compartment corresponds to the zone for perishable food.
2.15.1 Temperature indicator
The temperature indicator (see position 3 in Figs. 1 and 2) indicates
temperatures below 4 °C. The black dot turns green and OK is
displayed.
The temperature indicator determines the required controller position
for the refrigeration zone described above.
Seite 24 von 41