Bose Acoustimass 10 Series I Manual - Página 6

Navegue en línea o descargue pdf Manual para Altavoces Bose Acoustimass 10 Series I. Bose Acoustimass 10 Series I 17 páginas. Series 2
También para Bose Acoustimass 10 Series I: Manual del usuario (18 páginas), Manual del usuario (25 páginas), Manual del usuario (17 páginas)

Imprimir página

1. Disassembly/Assembly Procedures

DISASSEMBLY/ASSEMBLY PROCEDURES

CUBE ARRAY

Note: Numbers in parentheses correspond

to the item call outs in Figure 3.

1. Grille Removal

1.1 Grasp the grille (13) at the top and

bottom. Catches on the sides hold the grille

to the cube (2). Squeeze and pull the grille

off.

2. Grille Replacement

2.1 Line up the grille (13) so that the

curved edges are located at the top and

bottom. Push the grille onto the cube (2)

until it snaps into place. The bottom grille

should have the Bose

right hand corner.

2. Twiddler™ Removal

2.1 Perform procedure 1 first.

2.2 Remove the four screws (9) that

secure the twiddler (11) to the cube array

(2). Lift the twiddler out of the cube array.

2.3 Cut the wires as close as possible to

the twiddler.

Note: Make a note of the wiring configura-

tion.

3. Twiddler Replacement

3.1 Connect the wires to the twiddler (11).

3.2 Replace the four screws (9) that

secure the twiddler to the cube array (2).

3.3 Perform procedure 2.

logo in the lower