Alert-it Care Systems P162A Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Sensores de seguridad Alert-it Care Systems P162A. Alert-it Care Systems P162A 8 páginas. Wired pir motion detector

Imprimir página

Operation

Arming the unit:

Point the key-fob at the unit and press ARM. The red led will flash. You now have

30 seconds to leave the area without triggering the alarm

Disarming:

Point the key-fob at the unit and press DISARM within 4 seconds of entering the

room. The red led will flash.

Detection

Once movement is detected and the 4 second wait is past, then the P162 will oper-

ate the changeover switch and activate the alarm, leaving the front red led illuminat-

ed. After 30 seconds the unit will reset for a brief period to reassess if movement is

continuing. If so the output is re-activated.

Hence it is possible to find the occupant has returned to bed, the P162 appears to be

in standby, but the Nurse Call was triggered.

Cancelling the alarm:

Point the key-fob at the unit and press DISARM, then reset any remote alarm equip-

ment (eg the Nurse Call Wall unit)

Battery Low

If the battery is low, then the red led on the front will remain on without their being

an alarm and will not cancel by pressing DISARM.

Failure of the red keyfob light to flash will indicate the batteries will need replacing

in the keyfob

UH118 P162 PIR Mobility Detector Wired page 4 of 8