Beckmann+Egle MD3060 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Termómetro Beckmann+Egle MD3060. Beckmann+Egle MD3060 16 páginas.

Imprimir página
MD3150/3060
Set trigger condition or automatic switch-off of the
Mode 7:
device
Mode display
Pressing the minus key alternates between entry of 'trigger conditions' and 'automatic
switch-off' of the device.
Setting trigger condition: The large display shows 't r i g'
The 3 available trigger conditions are selected with the plus key:
- OFF
- top segment bar:
- bottom segment bar:
Setting the device for switch-off: The large display shows 'A o F F'
The device switch-off function can be selected with the plus key.
- OFF
- On
Manual save
Mode 8:
Mode display
The current temperature and the memory location number are displayed.
To carry out a series of measurements in manual save mode, a memory reset to
´000´ must at first be made with the minus key. Each press of the plus key saves the
current temperature value at the indicated memory location (small display).
If the measured value memory is reset but no manual saving carried out, the previous
series is not deleted, it will be deleted when a manual save is carried out.
More values can be added to an available series of measured temperature values in
manual save mode. For this, display the last-saved temperature value in the series in
mode 4 and then change to mode 8.
Pressing the plus key saves the current temperature value at the next memory
location.
Only MD3150 :
The current temperature value corresponds to the measuring channel selected in
mode 0. If 2-channel measurement mode is selected in mode 0, wait at least 2
seconds between 2 measurements in manual mode.
Please note:
Values entered in manual mode are only saved permanently when mode 8 is exited
and mode 0 adopted.
Copyright BECKMANN+EGLE GmbH, All rights reserved.
7
OFF,
Automatic switch-off function is disabled
Automatic switch-off function is enabled, i.e., if the device does not
detect activity within 4 minutes, it switches off automatically.
8
Memory location no.
Page 9
Small display
---
,
/ On,OFF
---
Interval measurement starts directly in mode 3.
Interval measurement starts if the temperature set
in mode 6 is exceeded.
Interval measurement starts if the temperature set
in mode 6 is undershot.
Small display
Large display
t r i g / A o F F
Large display
Current temperature
Internet: www.bue.de