DS Produkte 04297 Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Equipos de iluminación DS Produkte 04297. DS Produkte 04297 9 páginas. Led lights
Imprimir página
EN
Inserting / changing the batteries of the
products
For battery operation, 3 batteries (1.5 V, type AAA) are
required for each light. They are not included in the product
contents.
1. Open the battery compartment (3): Turn the battery compart-
ment cover anticlockwise and remove it.
2. If applicable, remove the empty batteries and insert 3 new
batteries (1.5 V, type AA). In the process, make sure that the
polarity (+ / –) is correct.
3. Put the battery compartment cover back on and turn it clock-
wise until tight. Make sure that the snap-in catches are situated
in the designated notches. Use the arrow on the light and the
battery compartment cover for orientation. The battery com-
partment cover must audibly and noticeably lock into place.
If the power of the lights diminishes, replace the batteries.
Changing the remote control battery
1. The battery compartment is located
pull
2. Remove the empty battery and
push
3. Slide the battery compartment all the way back into the remote
control. It must audibly and noticeably lock into place.
Start-up
When using the remote control, it must be pointed towards
the respective light.
1. Adhesion – The lights can be adhered to a smooth surface. It
must be dry as well as free of dust, grease and dirt.
2. Activation – To switch the products on, push the On / Off but-
ton (1) on the respective light or the ON button (e) on the remote
control.
3. Selecting a colour – Push the On / Off button on the respective
light several times or push the corresponding colour selection
button (c) on the remote control to switch between the different
colours.
4. Selecting a mode – Push the Multi Color button (b) on the
remote control to activate the colour change mode.
5. Setting the timer – With the timer buttons 4H and 8H (d), you
can set the timer (see chapter "Product overview" – "Remote
control").
6. Deactivation – To switch the products back off, push the On /
Off button on the respective light until the LED goes out or
push the OFF button on the remote control.
Cleaning and storage
•
If soiled, wipe the products off with a damp, soft cloth.
•
Store the products in a dry area, which is not exposed to
sunlight and is not accessible to children and animals.
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
on the narrow side of the remote
control. Remove it as shown.
insert a new battery (3 V, type
CR2025). The positive terminal
must point upwards.
Customer Service / Importer:
Technical data
Product number:
Model number:
Power supply
– LED
lights:
– Remote control:
Safety class:
Disposal
Dispose of the packaging in an environmentally-friendly
manner and make it available to the collection service for
recyclable materials..
Dispose of the products in an environmentally-friendly
manner at a recycling centre for old electrical and electronic
appliances. They do not belong in the household garbage.
More information is available at the administration in your
community.
Before disposal of the products, the batteries must be
removed and disposed of separately. To protect the
environment, batteries and rechargeable batteries must
not be disposed of together with normal household waste.
Instead they must be turned in at appropriate collection
points. Be sure to observe applicable legal regulations on
battery disposal.
All rights reserved.
04297
LED6
4.5 V DC each (3 x 1.5 V battery,
type AAA)
3 V (1 x 3 V button cell, type CR2025)
III
✆
+49 38851 314650 *)
Z 04297 M DS V1.1 0218
Instructions