Anslut 004916 Manual de instrucciones - Página 17
Navegue en línea o descargue pdf Manual de instrucciones para Ventilador Anslut 004916. Anslut 004916 20 páginas. Floor fan
Imprimir página
TECHNICAL DATA
Rated voltage
Input power
Operating value
Power consumption in standby mode (Psb)
Annual power consumption
Safety class
Protection rating
Sound power level, LwA
Max air speed
Max flow speed
Battery for remote control
Cord length
Operating value standard
IEC 60879:1986 (corr. 1992)
DESCRIPTION
1.
Display
2.
Air outlet
3.
Foot
4.
Air inlet
5.
Control panel
6.
Filter
7.
Panel
FIG. 1
230 V ~ 50 Hz
44.80 W
0.50 (m³/min)/W
0.46 W
10.24 kWh
II
IPX0
59.57 dB
22.50 m³/min
2.40 m/s
CR2032
150 cm
Remote control
Button
Function
POWER
Starts and switches off the fan.
Adjusts the speed in the
SPEED
sequence HI, MED, LOW.
OSC
Enables/disables oscillation mode.
Activates the timer function from
TIMER
0.5 to 8 h. The timer function can
be set in steps of 0.5 hours.
MODE
Switches mode.
FIG. 2
USE
1.
Place the fan on a dry, horizontal surface.
2.
Plug the plug in a power point.
3.
Start the fan by pressing POWER on the
remote control or the control panel. The
corresponding status light on the top of
the fan goes on. Switch off the fan by
pressing POWER again.
4.
Adjust the speed by continuing to press
SPEED on the remote control or control
panel. The corresponding status light on
the top of the fan goes on.
Adjusting the speed
Adjust the speed by continuing to press SPEED
on the remote control or control panel. The
corresponding status light on the top of the fan
goes on.
Oscillation mode
Enable/disable oscillation mode by pressing
OSC on the remote control or the control
panel. The corresponding status light on the
top of the fan goes on.
EN
17