ANSMANN POWERBANK 20.8 TYPE C Manual - Página 4

Navegue en línea o descargue pdf Manual para Accesorios ANSMANN POWERBANK 20.8 TYPE C. ANSMANN POWERBANK 20.8 TYPE C 5 páginas.

> CHARGING DEVICES

In order to charge a device, such as a smartphone for example, please

use the USB cable supplied (provided that the Micro-USB plug fits your

mobile device) or the original charge cable for your device. The Power-

bank likewise has a type-C output. Please use a suitable type-C cable

for this. Insert the USB plug of the cable into the POWERBANK and the

other end into your device. The charge process starts automatically.

The POWERBANK is equipped with Quick Charge 3.0. In order to be able

to use this technology, please check whether your end-device is

compatible.

Simultaneous charging of multiple end-devices is possible with res-

trictions. This depends on the total charge current required.

The POWERBANK switches off automatically after the charging is com-

plete. Please disconnect your device from the POWERBANK once the

charge process is complete. Please note that the Powerbank cannot

be charged and discharged simultaneously.

The POWERBANK may heat up a little depending on the charge/

discharge current.

TECHNICAL DATA

1. Cell type:

2. Capacity:

3. Input:

Type C:

4. Output:

5. Accessories:

6. Operating temperature: 10°C to +45°C

7. Charge time:

8. Protective functions:

Li-Po rechargeable battery pack

20,000mAh / 74Wh

Micro-USB: 5V DC | max. 2000mA

5V DC | max. 2000mA

2x USB:

5V DC | max. 3000mA

Type C:

5V DC | max. 3000mA

Quick Charge 3.0:

5V - 6.5V DC | max. 3000mA

6.5V - 9V DC | max. 2000mA

9V - 12V DC | max. 1500mA

Data cable (USB to Micro-USB)

ca. 9 hours

Over-charging protection, deep discharge

protection, overload protection, short-cir-