ATV aD5 Manual de inicio rápido - Página 9

Navegue en línea o descargue pdf Manual de inicio rápido para Batería ATV aD5. ATV aD5 16 páginas.
También para ATV aD5: Manual de inicio rápido (16 páginas)

Imprimir página

Trigger settings

You'll need to make trigger settings when using the aD5 for the first time or after you've changed

the types of pads. This allows the data from the pad sensors to be processed correctly so that the

aD5's performance capabilities can be fully utilized.

The aD5 has two settings wizards, allowing you to complete the settings simply by striking pads

as directed in the screen.

<1> Crosstalk Cancel Wizard

This prevents "crosstalk," when the vibration from hitting one pad is transmitted to another pad

causing it to sound.

Press the [HOME] button, and then press

[

]

Select the [SYSTEM] tab, and then press

[TRIGGER]

Press [Crosstalk Cancel Wizard]

As directed in the screen, strongly hit the

specified pad three times.

Specified pad

* If you press [RETRY], the previous strikes are

discarded.

When the screen indicates "OK" press

[NEXT] to proceed

Repeat steps 4—5 in the same way

The aD5 calculates the state of crosstalk for

all of the connected pads.

* We recommend that you play a rimshot when

striking the snare pad.

* If the specified pad is not connected, press [SKIP].

When the following screen appears,

play the pads to verify that there is no

crosstalk, and then press [NO]

* If there is crosstalk, press [YES] and repeat the

wizard once again.

In some cases, it might not be possible to

completely eliminate crosstalk. The following

actions might improve the situation.

• Increase the distance between the pads.

• Mount the pads on separate stands.

• Place the system on a stable floor.

• Adjust the tension of the mesh pads.

indication

1 Getting Ready