AOG IRB-18 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Quemador AOG IRB-18. AOG IRB-18 6 páginas. Infrared burner kit

Imprimir página

The infrared (IR) searing burner (optional) cooks with a

The infrared (IR) searing burner (optional) cooks with

powerful radiant heat.

a powerful radiant heat.

NOTE: ONLY ONE INFRARED BURNER IS PERMITTED

FOR USE ON AOG GRILLS.

Light the infrared burner following the LIGHTING

INSTRUCTIONS in this manual or printed on the

drip tray. Follow these guidelines when operating the

Infrared burner:

• DO NOT place food on the cooking grid until

the IR burner glows orange (Fig. 5-3). Drippings

are heated and evaporate instead of sticking to and

impairing burner function.

• For cleaning purposes; always leave your burner

on (after cooking) for an additional 5 minutes, to

allow for a burnoff period. This is important to

keep your burner clean and operating properly.

As the burner is self cleaning (at full temperature);

avoid the use of cleaners or abrasives.

• When not in use, always cover the infrared burner

with the stainless-steel cover. This protects the

burner from drippings (from other cooking), airborne

particles, and foreign objects (Fig. 5-2).

• Do not strike or scratch the burner ceramic as it

may chip, crack, or break (Fig. 5-2).

Note: Digital thermometer does not give accurate

readings for infrared burners.

Important: When grilling with the infrared burner,

always place a cooking grid above it.

The cooking grid must be removed for

rotisserie cooking.

CAUTION: DO NOT operate your IR burner with the

oven hood closed.

CAUTION: Never attempt to operate the IR burner

with the protective cover in place.

INFRARED BURNER OPERATION

Cover

Igniter

electrode

Fig. 5-1

Only handle the infrared burner cover when the

unit is cold or with a well-insulated long-handled

tool or heat resistant gloves.

SIDE VIEW (with cover on)

NO foreign

objects

Drippings

and other

Airborne

liquids

dust or

grease

OFF

Burner ceramic must be protected with cover when

burner is not in use.

SIDE VIEW

(burner on HI LIGHT

and glowing orange)

Drips and particles evaporate before hitting infrared

burner when cooking at the maximum setting.

Note: Vaporizer panels are not to be used with

Note: Flavor grids are not to be used with infrared

burners.

infrared burners.

To ensure proper operation, all infrared burners

(back and main) must be operated on the HI setting

for a minimum of 10 minutes. Thereafter, the ﬂ ame

may be lowered as desired.

CAUTION: Always monitor the infrared burner ﬂ ame

when operated on low, as it may blow

out in high-wind conditions.

WARNING

Igniter

electrode

Cover

Food

particles

or debris

Fig. 5-2

Igniter

electrode

Fig. 5-3