AOK ISF Series Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Luz exterior AOK ISF Series. AOK ISF Series 3 páginas.

Installation Guide

This procedure is designed as an installation aid. Skilled tradespeople that are familiar with general construction and electrical

installation techniques should pe orm the installation. Licensed electricians should provide electrical installation connections.

Installations and connections should be done in accordance with all national and local codes and permits. In no way is this

document intended to construe warranty or fitness of use of the products described, nor is it intended to provide safety instruction

for those installing the product.

WARNING

Before proceeding with installation or service maintenance of this product.

• Disconnect power to reduce electrical shock risk.

• Review the entire Installation Guide.

• Inspect this properly packaged product for any damage that may have occurred during transit.

• Verify product application complies with manufacturer design recommendations.

• Verify the availability of necessary tools and incidental material.

• Verify applicable code requirements. Field assembly and installation are subject to acceptance by local inspection authority.

• Appropriate safety equipment to be determined by end user, per applicable safety standards and precautions.

Type-A Bracket Installation (Without visor)

1-1

160.0mm

155.0mm

90°

1-3

Angle adjustment scale:

ISF Series Installation Guide

*Due to the constant improvements in product development, individual parameters might change. Please refer to our sales or R&D team for most up-to-date content as

specifications are subject to change without notice.

1-2

Torque of 81Nm

Horizontal rotation

Tools:

angle: ±63°

Vertical rotation

angle: 90°

8mm inner

hexagon wrench

M10 socket

hexagon screw

10mm inner

Torque of 142Nm

hexagon wrench

M12 socket

hexagon screw

126°

Safety rope

Ø11.5mm

Ø62.0mm

Ø85.0mm

1-4

Torque of 4.8Nm

Tools:

Phillips

screwdriver

M4 cross countersunk

head screw

Phillips

screwdriver

Torque of

2.2Nm

M4 cross countersunk

head screw

20mm wrench

Torque of

M16 waterproof

240Nm

connector

The first step:

1) Fix the lower bracket on the lamp cap radiator with 4 M8

inner hexagon screws with a special tool and a torque of

41NMn, as shown in Fig (1) and Fig (2)

Fig. (1)

M8 screws

Cap radiator

Lower bracket

Fig. (2)

The third step:

First put the lamp holder hanging groove into the mount-

ing screw of the upper bracket, and then fix the lamp

holder and the upper bracket with the M12 inner hexagon

screw, and adjust the installation Angle of the lamp holder

and the bracket according to the design, and then use

special tools: with 142Nm torque to fix the M12 screw tightly.

Fig (5).

Fig. (5)

Hanging screws

Hanging slot

Screws

Lamp holder

The second step:

1) Adjust the Angle of bracket and lamp pole according to

the Angle simulated by computer.

2) Use special tools: fix the upper bracket on the lamp pole

with two M10 screws with a torque of 81Nim, as shown in

Fig (3) and Fig (4).

Fig. (3)

Fig. (4)

The fourth step:

Then the lamp holder and the junction box waterproof line

of the male and female head connection is fixed. As shown

in Fig (6) and Fig (7).

Fig. (6)

Fig. (7)

[email protected]

+1 626-986-4050 (US)

+86 755 2357 9148 (CN)