Aolait ALED BSW CMY 400 Manual del usuario - Página 16
Navegue en línea o descargue pdf Manual del usuario para Luminaria Aolait ALED BSW CMY 400. Aolait ALED BSW CMY 400 20 páginas.
Imprimir páginaOFF--> Tilt Normal move.(Default)
ON-->
Reverse Tilt move.
P/T Rectify: Disable or enable position rectify function.
◆
OFF--> Disable P/T rectify
ON--> Enable P/T rectify -(Default)
Pan Offset:
Set PAN original position. Default: 10
◆
Tilt Offset:
◆
Lamp when:
◆
PowerON--> Turn on the lamp when power on. (Default)
RstDone--> Turn on the lamp after reset.
Manual--> Manually turn on the lamp.
Data hold:
◆
OFF--> When no DMX signal,return to middle position. (Default)
ON--> When no DMX signal,stop in the final position.
Factory Setting: Restore all parameter to factory setting.
◆
2.3.6 STAT-->Status: View status
Enter the page as shown in Figure 12:
Work Mode: Show the current working mode.
◆
Address:
Show the current address.
◆
Version:
Show the version of the lamp.
◆
Elapse:
Working hours after turn on.
◆
Tatol:
Cumulative hours of operation
◆
When <Data hold> set <ON>,click to
clear DMX data, and make the lamp
return to themiddle position.
Click to reset.
1.
Common fault handling
The lamp contains professional components such as microcomputer circuit board and
high-voltage power supply. For your safety and product life, non-professionals should not
disassemble the lamp and related accessories without authorization.
Set TILT original position. Default: 10
Figure 12 page of status
Common faults and use attention