Aolait ALED BSW CMY 400 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Luminaria Aolait ALED BSW CMY 400. Aolait ALED BSW CMY 400 20 páginas.

Thank you for your patronage!

We are confident that our excellent products and service can satisfy you.

For your own safety, please read this user manual carefully before installing the device.

In order to install, operate, and maintain the lighting safety correctly.

We suggest that the installation and operation should be done by the verified technician

and follow the instruction strictly.

CAUTION!

Keep this device away from rain and moisture!

CAUTION!

Unplug mains lead before device's installation,cleaning and maintenance!

Every person involved with the installation, operation and maintenance of this device has

to:

-be qualified

-follow carefully the instructions of this manual

INTRODUCTION

Thank you for having chosen this professional moving head.

You will see you have acquired a powerful and versatile device.

Unpack the device. Inside the carton box you should find:

1. One power in cable

2. One 3 Pin DMX cable(5 Pin optional)

3. Two mounted brackets

4. One safety rope

5. One English user manual

（Flight case, Clamps are optional, please contact your dealer）

Please check carefully that there is no damage caused by transportation. Should there be

any questions, please consult your dealer and don't install this device.

GENERAL GUIDELINES

This device is a lighting effect for a professional use on stages, TV, in discotheques,

theaters, etc., The device was designed for indoor use only.

This fixture is only allowed to be operated with the max alternating current which stated in

the technical specifications in 6

Lighting effects are not designed for permanent operation. Consistent operation breaks

may ensure that the device will serve you for a long time without defects.

Do not shake the device. Avoid brute force when installing or operating the device.

While choosing the installation-spot, please make sure that the device is not exposed to

extreme heat, moisture or dust. Please don't project the beam onto combustible

substances. The minimum distance between light-output from the projector and the

illuminated surface must be more than 0,5 meter.

If you use the quick lock cam in hanging up the fixture, please make sure the quick lock

fasteners turned in the quick lock holes correctly.

page of this manual.